-
-
SERVICE SUPPORT
02
2023
-
08
Naming of turning insert model
The model naming of turning inserts usually consists of a series of letters and numbers. Different manufacturers may have slightly different naming rules, but they usually include the following elements: insert type, shape, size, cutting direction, material, etc.
Firstly, the blade type usually refers to the type of blade indicated by letters. For example:
CC: ordinary turning insert
DC: carbide turning insert
VC: ceramic turning insert
SC: thread turning insert
Secondly, the blade shape. It refers to letters or numbers are used to indicate the shape of the blade, such as:
S: square blade
C: circular blade
T: triangular blade
D: diamond blade
Thirdly, the cutting direction, numbers are usually used to indicate the cutting direction of the blade, for example:
0: The main cutting angle is 0 degrees (generally used for nonmetallic materials).
1: The main cutting angle is 45 degrees.
2: The main cutting angle is 75 degrees.
Fourthly, the blade size, using numbers to indicate the size of the blade, for example:
08: indicates that the blade width is 8 mm.
16: indicates that the blade width is 16mm.
Finally, the cutting material, sometimes letters or numbers are used to indicate the cutting material suitable for the blade, such as:
P: Suitable for steel processing.
M: Suitable for processing stainless steel.
K: Suitable for cast iron processing.
Based on the above factors, a typical turning insert model may be similar to "DCMT11T304-MF", in which:
DCMT: carbide turning insert
11: Blade shape code (triangle)
T: The main cutting angle is 75 degrees.
304: Blade size code (width 3.18mm)
MF: Suitable for steel processing.
Please note that different manufacturers may have different naming conventions, so you should carefully consult the relevant blade catalog and specification table when selecting blades.
The following are some models of cutting inserts of Zhuzhou Jinxin cemented carbide Co., Ltd.
Related news