-
-
-
SERVICE SUPPORT
22
2025
-
02
How do you use the grooving inserts？
The first step in using grooving inserts is to select the right insert precisely according to the specific requirements of the machining task. Considering the material, hardness and size of the workpiece, as well as the depth and width of the groove, the insert type, material and geometry should be selected to match. For example, machining hard materials requires more wear-resistant insert materials. Jinxin can provide you with a wide range of inserts such as MGMN200-G, MGMN250-M and other MGMN series inserts, QCMB series inserts and TDC2 series inserts, if you need, you can contact us to help you choose the right product.
When installing grooving inserts, make sure that the installation position is accurate and the clamping is firm. If not installed correctly, the inserts are prone to vibration during the cutting process, which not only reduces the accuracy of grooving, but also may lead to damage to the inserts or even cause safety accidents.
Setting cutting parameters is also very important. Cutting speed should be reasonably adjusted according to the workpiece and blade material, too fast blade easy to wear, too slow is inefficient; feed needs to be moderate, the depth of cut should also be based on the blade and the workpiece properly set to avoid the depth of unreasonable impact on the processing effect.
In the cutting process, we should pay close attention to the processing status, pay attention to the cutting sound, chip shape and the operation of the machine tool. Once found abnormalities, such as excessive vibration, sound abnormalities, etc., need to immediately stop the machine to check, troubleshooting and then continue to process, so as to ensure that the grooving work is completed successfully.
Related news
